Mirrors Built to Last… and Covered if They Don’t.
All Seizmik Mirrors are built to last and covered by a NO Questions Asked, UNLIMITED LIFETIME WARRANTY!
At Seizmik, we never cut corners. To us, quality and reliability matter and we go to extremes to engineer the kinds of mirrors and UTV accessories that today’s consumers demand. Useful. Durable. Affordable. And built to last.
Thanks to features like cast aluminum or durable ABS plastic housings and low-profile mounting clamps, our side view mirrors for UTVs and Side-by-Sides are able to withstand anything. Simply put, we make a tougher mirror and we guarantee it. For life.
Pursuit Night Vision Series Side View Mirrors
MSRP: $329.99
Seizmik’s Pursuit Sideview Mirrors with Dual Mode LED Night Vision come equipped with white and green Cree LED chips which provide peripheral illumination to the mid-forward and side ground areas around the UTV.
Night Vision Mode may be used for better visual acuity at lower light levels as the eyes adjust to the surrounding darkness quicker while using green light. This mode also helps avoid attracting attention from game and wildlife. The White Light Mode is used for maximum illumination, providing bright lighting around the vehicle when needed.
LED Features:
- A CAST ALUMINUM HOUSING with IP68 water resistant rating.
- DUAL COLOR MODE features Green Night Vision for better visual acuity at low light levels and White for bright illumination when needed.
- WHITE LEDs:
- Chips: 3x 11.9W Cree® XBD
- Lumens: 565LM
- GREEN LEDs:
- Chips: 3x 6.6W Cree® XBD
- Lumens: 266LM
Mirror Features:
- CAST ALUMINUM HOUSING — Ultra tough metal housing can withstand the most extreme punishment.
- POSITION TENSION ADJUSTMENT BOLTS — Always be able to keep it tight as new.
- FULL BREAKAWAY GEOMETRY — Designed to break away during impacts to minimize damage.
- PRE-SET POSITION DETENTS — Delrin® Detents allow the mirror to be quickly popped back into place.
- ADAPTIVE 360º BRACKET ROTATION — Will accommodate any angle roll cage pillar and provides optimal viewing position, so a user can mount it high or low and adjust to perfect viewing position.
- LOW PROFILE MOUNTING BRACKETS — Allow mirrors to work with most any windshield.
- ENCLOSED FLOATING MIRROR MOUNT — Mirror glass may be independently adjusted inside housing and is replaceable.
- SHATTER-RESISTANT SAFETY GLASS — For maximum safety.
- CONVEX MIRROR SURFACE — Provides wide viewing angle and image stability.
- WEATHER SEALED CAPS — Removable caps protect hardware from moisture and debris (red, yellow, green, and blue color kits available).
- FITMENTS FOR MOST ANY VEHICLE — Round Tube ROPS; Polaris® Pro-Fit ROPS; and CAN-AM® Profiled ROPS.
- Part #18086 – 1.75” ROPS
- Part #18087 – 2”w/shim for 1.875” ROPS
- Part #18088 – Polaris Pro-Fit or Can-Am Profiled ROPS
Kits include: 1 pair Pursuit LED mirrors; wiring harness; switch; and mounting hardware.
- Part #18074 – Red
- Part #18075 – Yellow
- Part #18076 – Green
- Part #18077 – Blue
Customize your UTV for day or night!
Photon Side View Mirrors
MSRP: $209.99
Seizmik’s Photon Side View Mirrors feature a sleek, horizontal design and new ball joint mounting system created to compliment most any UTV, but particularly the sport side-by-sides on the market today.
The new ball joint and low profile clamp allow for a wide range of motion and break away feature, and accommodates the various A-pillar angles created by OEM or custom cages. Clamp sizes available will accommodate most any UTV: 1.75” round tube ROPS; 2” round tube with included shims for 1.875” round tube ROPS; and Polaris Pro-Fit or Can-Am Profiled ROPS.
NEW BALL JOINT MOUNTING SYSTEM—Versatile Mirror Clamp with a new Ball Joint design provides a wide range of rotation for the mirror housing and installation options
FULL BREAKAWAY GEOMETRY—Designed to break away during impacts to prevent damage
SHATTER RESISTANT SAFETY GLASS—For maximum safety
CONVEX MIRROR SURFACE—Provides a wider viewing range and image stabilization
DURABLE CAST ALUMINUM HOUSING—For a nearly indestructible and lightweight aluminum housing to withstand the most extreme punishment
LOW PROFILE HINGED CLAMP FOR ROUND TUBE ROPS—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation
CAST ALUMINUM MIRROR GUARD—Full Perimeter Bezel constructed from cast aluminum for the ultimate mirror protection
304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable, trouble-free performance
RUN IN STYLE—Color Bezel & Cap Kits are available in popular colors to coordinate with your ride (sold separately)
UNLIMITED LIFETIME WARRANTY—The best warranty and customer service available
- Part #18107 – 1.75” ROPS
- Part #18108 – 2”w/shim for 1.875” ROPS
- Part #18109 – Polaris Pro-Fit or Can-Am Profiled ROPS
Kits include: 1 pair Photon mirrors and mounting hardware.
- Part #19019 – Red
- Part #19020 – Blue
- Part #19021 – Green
- Part #19022 – Yellow
A Mirror Designed for Sport Side-by-Sides
HALO-RA LED Rearview Mirrors
MSRP: $179.99
The Seizmik Halo-RA LED Rearview Mirror features multimodal, high intensity RGB LEDs and a high intensity COB (Circuit On Board) LED map light along with a powder coated cast aluminum bezel and an ABS rear housing. The result is a strong, lightweight, and durable mirror with a convenient hands free cab light.
LED Features include:
- IP65 weather resistant housing
- Scratch resistant polycarbonate lenses
- High intensity RGB programmable lights
- High intensity COB map light
- Operates on 4 AAA batteries
Mirror Features include:
- Solid cast aluminum components
- 304 stainless steel hardware
- Low profile hinged clamp
- Shatter resistant safety glass
- 100% Unlimited lifetime warranty
- Part #18019 – 1.75” ROPS
- Part #18020 – 2” w/shim for 1.875” ROPS
- Part #18021 – Polaris Pro-Fit Ranger Factory Header Panel
- Part #18022 – Can-Am X3 Factory Mirror Mounting Plate
- Part #18023 – Can-Am Defender Factory Header Panel
Light Up Your Cab!
Pursuit Side View Mirrors
MSRP: $179.99
The Pursuit mirrors are fully adjustable and serviceable. Independent convex safety glass provides a wide viewing angle and can be replaced without having to replace the whole mirror. The adjustable independent glass stays where you set it, keeping riders focused on the trail and not their mirror. Notched Delrin® detents allow the mirror to fold in when hit and be returned to its original position in one move.
- Cast Aluminum Housing—Designed to withstand the most extreme punishment
- Weather Sealed Caps—Designed to keep out debris (red, yellow, and green color kits available)
- Rubber Vibration Isolators—Keeps a clear image and the mirrors from sliding
- Position Tension Adjustment Bolts—For keeping your mirror at just the right angle
- Low Profile Steel Mounting Brackets—Allow mirrors to work with most any windshield
- UNLIMITED LIFETIME WARRANTY
- Part #18071 – 1.75” ROPS
- Part #18072 – 2”w/shim for 1.875” ROPS
- Part #18073 – Polaris Pro-Fit or Can-Am Profiled ROPS
- Part #18074 – Red
- Part #18075 – Yellow
- Part #18076 – Green
- Part #18077 – Blue
Our best selling mirror!
EMBARK Side View Mirrors
MSRP: $104.99
Seizmik’s Embark Side View Mirrors are versatile, vertically designed, side mirrors with mounting options available for most any UTV. The aesthetics and vertical design of the mirrors, along with its low profile clamp, allow for a wide range of mounting options.
Mount the mirror in a traditional upright position or mount it inverted to accommodate the field of view your work requires. Equipped with safety features like breakaway geometry, impact resistant ABS housing, a full perimeter bezel mirror guard, and shatter resistant and replaceable safety glass, the Embark mirror will withstand the punishment your UTV faces while out on the trail, in the fields, or wherever your work or play takes you.
VERTICAL MOUNTING ORIENTATION—Versatile Mirror Clamp provides 360º rotation for mirror housing which allows wider range of installation options, including an upright or inverted position
FULL BREAKAWAY GEOMETRY—Designed to break away during impacts to prevent damage
SHATTER RESISTANT SAFETY GLASS—For maximum safety
CONVEX MIRROR SURFACE—Provides wider viewing range and image stabilization
IMPACT RESISTANT ABS HOUSING—Structurally Reinforced Housing is extremely rigid to prevent flex and maintain form
LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
MIRROR GUARD—Full Perimeter Bezel constructed from high impact ABS for superior mirror protection
304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance
POSITION TENSION ADJUSTMENT BOLT—Always be able to keep it tight as new
RUN IN STYLE—Color Bezel & Cap Kits are available in popular colors to coordinate with your ride (sold separately)
UNLIMITED LIFETIME WARRANTY—No matter how the mirror gets damaged, we’ll send you the parts to repair your mirror for free
- Part #18104 – 1.75” ROPS
- Part #18105 – 2”w/shim for 1.875” ROPS
- Part #18106 – Polaris Pro-Fit or Can-Am Profiled ROPS
- Part #19023 – Red
- Part #19024 – Green
- Part #19025 – Yellow
- Part #19026 – Blue
Great features at a great price!
Strike Side View Mirrors
MSRP: $99.99
Seizmik’s Strike side view mirrors have a super-durable ABS plastic housing that has a breakaway feature to protect it during impacts. The Strike mirrors include a heavy-duty, yet low-profile, steel clamps, driver and passenger side mirrors, and all necessary mounting hardware. With 360º of mounting rotation and a ball joint adjustment knuckle, they can be mounted at virtually any angle and still provide a clear view of the trail you are leaving behind.
- Adaptive 360 Bracket Rotation—Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time
- Full Breakaway Geometry—Designed to break away during impacts to prevent damage
- Ball Socket Joint — Provides a broad range of viewing angles
- Low Mass Steel Mounting Clamp — Provides maximum strength and durability
- Convex Mirror — More than doubles your field of view and provides image stabilization
- Shatter-resistant Safety Glass and High-Impact ABS Plastic Housing — Resist damage
- Position Tension Adjustment Bolt — Let you always be able to keep it tight as new
- Sold as Pairs
- Color Kits Available — Customize the look of your ride (Comes standard with black inserts)
- UNLIMITED LIFETIME WARRANTY
- Part #18091 – 1.75” ROPS
- Part #18092 – 2”w/shim for 1.875” ROPS
- Part #18093 – Polaris Pro-Fit or Can-Am Profiled ROPS
- Part #18094 – Red
- Part #18095 – Yellow
- Part #18096 – Green
- Part #18097 – Blue
Great features at a great price!
HALO-RA BILLET Rearview Mirrors
MSRP: $199.99
The Seizmik Halo-RA Rearview Mirror features a precision milled, 6061 aircraft grade aluminum bezel with an ABS rear housing creating a strong, lightweight, and high performance mirror.
The Halo-RA is easily serviceable. The milled aluminum bezel may be removed and the convex safety glass may be replaced without having to replace the whole mirror.
And, like all Seizmik mirrors, the Halo-RA Rearview Mirror is covered under Seizmik’s 100% Unlimited Lifetime Mirror Warranty.
- 6061 AIRCRAFT GRADE ALUMINUM CNC MILLED COMPONENTS—Precision Milled Hard Anodized Aluminum for high performance and durability.
- 304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance.
- LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
- STAINLESS STEEL BALL STUD LOCK BOLTS—Set Bolts can lock mirror into place or be adjusted to allow for smooth movement with enough resistance for micro adjustment.
- ALUMINUM BILLET LOCKING BLOCK—Locking Block and bolts lock ball stud in place to prevent unwanted movement under the roughest conditions.
- 3/8″-16 MOUNTING POST THREAD—Popular thread used for mounts in most custom roll cages.
- LASER ETCHED GRAPHICS—High Resolution Laser Etched Graphics on Hard Anodized Aluminum Finish won’t wear off.
- SHATTER RESISTANT SAFETY GLASS—For maximum safety.
- CONVEX MIRROR GLASS—Convex surface provides super wide viewing range with added image stability. High optic glass with chrome plated backing provides superior image clarity and definition.
- SEIZMIK DESIGN—Styled to compliment all Seizmik® side view mirrors.
- Part #18011 – 1.75” ROPS
- Part #18012 – 2” w/shim for 1.875” ROPS
- Part #18013 – Polaris Pro-Fit Ranger Factory Header Panel
- Part #18014 – Can-Am X3 Factory Mirror Mounting Plate
- Part #18015 – Can-Am Defender Factory Header Panel
HALO-RA CAST Rearview Mirrors
MSRP: $104.99
The Seizmik Halo-RA Cast Rearview Mirror features a powder coated cast aluminum bezel with an ABS rear housing creating a strong, lightweight, and durable mirror.
The Halo-RA Cast Rearview Mirror is easily serviceable. The powder coated cast aluminum bezel may be removed and the convex safety glass may be replaced without having to replace the whole mirror. Like all Seizmik mirrors, the Halo-RA Cast Rearview Mirror is covered under Seizmik’s 100% Unlimited Lifetime Mirror Warranty.
- SOLID CAST ALUMINUM COMPONENTS—Powder Coated Cast Aluminum for lightweight performance and durability.
- 304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance.
- LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
- STAINLESS STEEL BALL STUD LOCK BOLTS—Set Bolts can lock mirror into place or be adjusted to allow for smooth movement with enough resistance for micro adjustment.
- CAST ALUMINUM LOCKING BLOCK—Locking Block and bolts lock ball stud in place to prevent unwanted movement under the roughest conditions.
- SHATTER RESISTANT SAFETY GLASS—For maximum safety.
- CONVEX MIRROR GLASS—Convex surface provides super wide viewing range with added image stability. High optic glass with chrome plated backing provides superior image clarity and definition.
- SEIZMIK DESIGN—Styled to compliment all Seizmik® side view mirrors.
- Part #18024 – 1.75” ROPS
- Part #18025 – 2” w/shim for 1.875” ROPS
- Part #18026 – Polaris Pro-Fit Ranger Factory Header Panel
- Part #18027 – Can-Am X3 Factory Mirror Mounting Plate
- Part #18028 – Can-Am Defender Factory Header Panel
IMAGE GALLERY
UTV Side View Mirrors
MSRP: $79.99
The Seizmik UTV Side View Mirror has a large convex viewing area, super-strong ABS plastic housing, break-away fold-in feature, and tension adjustments. With an improved design of the ball knuckle and a low-profile clamp, the mirror features 360 degrees of adjustability and less interference with other accessories. As with all Seizmik mirrors, the new Side View Mirrors also comes with the best warranty in the business: Unlimited Lifetime Warranty. Seriously.
- Adaptive 360 Bracket Rotation—Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time
- Full Breakaway Geometry—Designed to break away during impacts to prevent damage
- Convex Mirrors —More than double your field of rear view
- High-Impact ABS Plastic Housing—Resists damage
- Ball Socket Joint—Provides a broad range of viewing angles
- Heavy-Duty Steel Mounting Clamp/Bracket—Low mass design provides maximum strength and durability
- Convex Mirror Surface—Provides wider viewing ranger and image stabilization
- Shatter Resistant Safety Glass—For maximizing safety and longevity
- Position Tension Adjustment Bolt—Always be able to keep it tight as new
- UNLIMITED LIFETIME WARRANTY
- Part #18080 – 1.75” ROPS
- Part #18081 – 2”w/shim for 1.875” ROPS
- Part #18082 – Polaris Pro-Fit or Can-Am Profiled ROPS
HALO-R CAST Rearview Mirrors
MSRP: $83.99
The Seizmik Halo-R Rearview Mirror features an ABS front replaceable bezel and an ABS rear housing creating a strong, lightweight, and durable mirror.
- Two Ball Joints—Maximizes range of adjustment.
- High Impact ABS Plastic Housing—Resists damage.
- Shatter Resistant Safety Glass—For maximum safety.
- Convex Mirror Surface—Wider viewing range and image stabilization.
- Built Tough—Heavy duty steel clamp with low mass design for maximum strength and durability.
- Impact Resistant ABS Bezel—Protects and secures mirror glass and allows for easy glass replacement.
- Color Kits Available—Customize your look (ships with grey bezel and back logo).
- Seizmik Design—Styled to compliment all SEIZMIK side view mirrors.
- UNLIMITED LIFETIME WARRANTY
- Part #18053 – Can-Am Defender Factory Header Panel
- Part #18055 – 1.625” w/shim for 1.5” ROPS
- Part #18056 – 1.75” ROPS
- Part #18057 – 2” w/shim for 1.875” ROPS
- Part #18058 – Polaris Pro-Fit Ranger Factory Header Panel
- Part #18059 – Can-Am X3 Factory Mirror Mounting Plate
- Part #19001 – Yellow
- Part #19002 – Red
- Part #18093– Blue