Available at your favorite Powersports retailer

UHMW Skid Plate KITS

with BUILT IN Tree Kickers/Rock Sliders

Non-Crew Platforms
MSRP: $999.99

Crew Platforms
MSRP: $1349.99

PRODUCT VIDEOS

Have a laugh with the Seizmik Knuckleheads and join Susan and Tommy as they visit their favorite shop teacher, Mr. Novak, to learn all about Seizmik Skid Plates.

What, no sense of humor?  No problem, here is a serious look at the features for Seizmik Skid Plate Kits.

While your UTV or Side-by-Side came equipped with what the manufacturer might refer to as a “skid plate”, it’s really nothing more than a very thin piece of plastic that offers minimum protection for your fuel tank, battery, parts of your transmission, and (if you’re lucky) a small portion of the front and rear differentials.

Don’t take a chance with these crucial components, protect your investment and extend the life of your UTV with better undercarriage protection—demand a Seizmik UHMW Skid Plate & Rock Sliders Kit and tackle the trails knowing that your undercarriage is protected from unwanted damage.

VITAL PROTECTION FOR YOUR VEHICLE

Manufactured at our facility in Cairo, GA, our plates are precision cut and bent from 1/2” thick Ultra High Molecular Weight (UHMW) polyethylene sheets, offering our skid plates and rock sliders superior strength to the stock OEM or an aftermarket aluminum skid plate.

KEY FEATURES

The 1/2” thick UHMW features impressive resistance to denting, gouging, and rusting caused by blunt edge impacts or sliding over obstacles.

A typical OEM plate’s material has a tensile strength of roughly 4500 PSI, while Seizmik’s UHMW material has a tensile strength of 7010 PSI.  And Seizmik’s plates are 4x thicker than the average OEM plate.

Our kits also include side panels to serve as tree kickers and rock sliders, offering protection to your vehicle’s rocker panels.

Easy to handle sections piece together to cover the entire undercarriage of the vehicle, including the front and rear differentials.  The corrosion resistant mounting hardware is recessed below the plate’s surface, protecting the fasteners from damage.

Installation is made easier with less drilling required thanks to the use of existing OEM mounting points and glass filled nylon frame clamps with brass inserts (used where possible).

Maintenance access points make routine servicing easier—no need to drop the plate to change out fluids.

Like to spend some time in the mud? Not a problem! Our plates come with more drain holes strategically placed for quicker clean up.  There is no need to drop the plate in order to clean the bottom of your UTV. 

When you start to add up all of the features and protection to the crucial components of your vehicle, the value offered by Seizmik’s UHMW Skid Plate & Rock Sliders Kit becomes apparent.  Don’t miss out on this “must have” upgrade and protect your investment.

Features Include:

½” UHMW Construction—Offering superior resistance to denting, rusting and gouging caused by blunt edge impacts or sliding over obstacles

Low Friction/High Abrasion Resistance/Self Lubricating Properties—Making UHMW an excellent choice for sliding across hard surfaces

Integrated Rock Sliders/Tree Kickers—For added rocker panel protection

Thicker and Stronger Material—Nearly 4x thicker with roughly 56% more tensile strength than the typical stock OEM plate

Less Drilling—For shorter & easier installation with the use of Glass Filled Nylon Frame Clamps with Brass Inserts and Existing OEM Mounting Points where possible

Easier Maintenance—Maintenance Access Points are cut where needed making vehicle maintenance easier

Easier Clean Up—More drain holes for quicker/easier clean outs

Fender Flare Compatible—Works with SEIZMIK Fender Flare Kits

Made in the USA—Manufactured at our facility in Cairo, GA

Current Fitments*:

NON-CREW PLATFORMS

Part # 76-10163 — Polaris Ranger XP 1000
Part # 76-10164 — Polaris General XP 1000 | Polaris General
Part # 76-10165 — Polaris RZR XP 1000 | Turbo
Part # 76-10166 — Polaris RZR Turbo S
Part # 76-10167 — Polaris RZR Pro XP

CREW PLATFORMS — Late 2021/Early 2022

Part # 76-10168 — Polaris Ranger XP 1000 – Crew
Part # 76-10169 — Polaris General XP 1000 – Crew | Polaris General – Crew
Part # 76-10170 — Polaris RZR XP 1000 | Turbo – Crew
Part # 76-10171 — Polaris RZR Turbo S – Crew
Part # 76-10172 — Polaris RZR Pro XP – Crew

*Do you have a question about our kits on your machine? Call Seizmik toll free at 1-866-838-3366 and one of our awesome customer services reps will help point you to the correct Skid Plate Kit for your ride.

Available Fitments

New
$1,059.99

Part # 76-10163 | Fits Polaris Ranger XP 1000* *DOES NOT FIT 2021 and newer models

New
New